Service maintenance of water filters and their systems

Water purification equipment installed in a country house requires regular maintenance, which consists of cleaning the primary units of the equipment from deposits. RO Service Jabalpur recommends that its clients service the water purification filters installed in the house at least once a year.

However, when contacted with a proposal to service the system, many clients refuse this service, citing why it is needed if everything works fine. Any equipment and water purification equipment is technically complex, which, for uninterrupted operation and performance of its functions, must be regularly checked for operability and cleaned of essential elements and units from various deposits that can worsen the functioning of filters. In the “absence” of a crisis in the country and “frantic growth” of salaries, each of us tries to save the family budget as much as possible. To meet our clients halfway, we will tell you how to check the operability independently and, if necessary, eliminate possible malfunctions of water purification equipment.

Maintenance of water purification system. Range of services

The company “Repair Service Bro” carries out:

1. Calculation, design, assembly and installation of water treatment systems according to the analysis of the Customer’s water and maintenance of these systems during the warranty period;
2. Calculation and implementation of modernization of the Customer’s existing water treatment system;
3. All necessary calculations and a range of works on technical maintenance of water treatment systems of third-party companies and manufacturers;
4. Post-warranty service maintenance.

Key points of the maintenance regulations

Compliance with the regulations is a guarantee of protection against breakdowns!

List of main points of maintenance regulations:

1. Testing all functions of each stage of water purification in the system;
2. Testing and, if necessary, correction and programming of electronic units of the system;
3. If necessary, carry out extraordinary regeneration;
4. Disassembly and cleaning (etching) of all critical parts of the pre-filter;
5. Etching of the flow sections of the air ejector in the aeration system;
6. Disassembling and cleaning the air bleed valve;
7. Disassembly and cleaning of critical mechanisms of automatic control valves;
8. Testing and, if necessary, adjusting the fill level and salt in the reagent tank;
9. Testing and, if necessary, replacing worn mechanisms and adjusting them in the compressor and dispenser.

Professional approach. Responsibility and quality.

We eliminate all Customer’s comments.

Principal terms of the contract for maintenance of the water treatment system. Cost, terms, warranty

From commissioning, warranty service maintenance is provided for 12 months.

• Upon expiration of the warranty period, the system user may indefinitely enter into an automatically renewed Service Maintenance Agreement.
• The Service Maintenance Agreement determines the cost of work depending on the composition of the equipment being serviced.

Other issues related to service maintenance can be found by calling:

Why choose us

When performing repairs and maintenance, RO service in Zirakpur primarily cares about your convenience and quality of everyday life. Therefore, it approaches each case of work individually with the equipment installed at your place. The standard list of maintenance works includes, but is not limited to, the following services:

– diagnostics of the operation of the filtering system and its parts;

– setting up control of filtration and automatic cleaning processes;

– delivery, filling and, if necessary, replacement of consumables, including filter and regenerating media, replacement cartridges, etc.;

– cleaning the filter control units from mechanical impurities, checking the tightness of the connections;

– assessment of water quality using measurements of water control parameters.

Without regular maintenance, you will most likely face a problem when repairing water filters, which will be expensive. Water treatment devices have a complex enough design that in all cases, you can fix the breakdown yourself. It’s like with a car that you take to a workshop: timely maintenance will definitely be cheaper than replacing a failed clutch unit or the entire engine.